Skip to content

FREE SHIPPING TO THE CONTIGUOUS US · SHIPS FROM US WAREHOUSES

AlliSpa

Cold plunge guide · 6 min read

Choosing a cold plunge: tubs, chillers and what to expect

Insulated tubs vs. chiller systems, how much ice you’ll really use, where to put it, and keeping the water clean.

A cold plunge can be as simple as an insulated tub and a few bags of ice, or as sophisticated as a filtered, temperature-controlled system that stays ready around the clock. Here is how to decide which you need.

The two main approaches

Insulated tub + ice

Portable, insulated tubs are the lowest-cost way to start. You fill them from a hose, add ice to bring the temperature down, and cover them between sessions. They suit people who plunge a few times a week, want to try the habit before investing more, or need something they can pack away.

  • Pros: affordable, no plumbing or electrical, easy to set up and store.
  • Trade-offs: you buy and haul ice, the water warms up between sessions, and you change the water more often.

Chiller-based systems

A chiller is a refrigeration unit that circulates and cools the water to a temperature you set. Most also filter the water, and many add ozone or UV sanitation. They cost more up front and need a suitable power source, but there’s no ice to buy and the plunge is ready whenever you are.

How cold?

Many people plunge somewhere in the 40s to 50s °F, and beginners often start warmer and for shorter periods. There is no single “right” number, so start conservatively and listen to your body. Read our safety basics before your first session.

Placement and weight

  • Water weighs about 8.3 lb per gallon. A 100-gallon plunge holds roughly 830 lb of water before you add a person, so place it on a surface that can carry the load, such as a slab, a ground-level patio or a properly rated deck.
  • Outdoors, keep it in shade where you can, so the sun doesn’t warm the water.
  • Indoors, use a waterproof floor near a drain, and plan how you will empty it.
  • In freezing climates, follow the maker’s winterizing guidance for tubs and especially for chillers.

Keeping the water clean

  • Rinse off before you get in, and keep the cover on between sessions.
  • Without filtration, change the water regularly. Change it sooner if it looks cloudy or smells off.
  • Chiller systems with filtration and sanitation extend water life. Follow the manufacturer’s schedule for filters and any sanitizer.

Questions? We’ll help you size it.

Tell us who will use it, how often, and where it will go. Book a free consultation → or browse cold plunge →